Customization: | Available |
---|---|
Warranty: | 12 Months |
Standard: | IEC 60332-1-1,2,3; En 50086-1-1994 |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
IEC 60332-1 Single Cable Vertical Flame Tester
Introduction:
A single wire and cable combustion tester is used to test the flame retardant performance of the insulation layer of wire and cable under abnormal conditions such as overheating and overcurrent. It is applied to test the vertical flame spread of cable or cable, and it can also test the flame condition of the droplet.
The timing design of the tester meets the requirements of iec60332-1 and iec60332-2 blowtorch design. Test one set of a control system is equipped with two sets of test boxes and test lights; Can save most control costs as a customer. And achieve the purpose of design
Standard:
IEC 60332-1-1,2,3; EN 50086-1-1994
GBT 18380.11,12-2008
Application:
Wire
Cable
Main features:
Stainless steel box, the height of 1300mm, the width of 300mm, the depth of 450mm.
Two stainless steel rods can bind a single wire cable or optical cable samples.
1KW mixed standard burner can provide the standard test fire source.
Regulating gas and airflow rate of the rotor flow meters.
Pressure gauge and pressure relief valve to ensure that the pressure output is 0.1MPA.
Electric spark ignition device.
Flame height measuring tool.
Up to four-time modes can be selected according to different sample diameters.
Calibration kit for the testing flame.
Operating voltage |
AC220 V ± 10V 50HZ |
Ambient temperature |
room temperature ~ 40 ºC |
Gas Pressure |
0.1MPa |
Gas purity |
Propane> 95%; compressed air |
Timing Accuracy |
0.1s |
Model |
GD-IEC60332 |
Size |
600(W)×450(D)×1250(H)mm |
Power |
AC 220V, 50/60Hz, 3A |
Weight |
60kg |
Manual |
Provide |