GD-17144
Petroleum Products ASTM D4530 Micro Conradson Carbon Residue Test Apparatus
Test Standard:
The standard ASTM D4530 covers the determination of the amount of carbon residue formed after evaporation and pyrolysis of petroleum materials under certain conditions and is intended to provide some indication of the relative coke forming tendency of such materials. The test results are equivalent to the Conradson carbon residue test.
Introduction:
The Micro Conradson Carbon Residue Apparatus is an automatic airtight furnace that is pre-programmed to run tests to determine Micro (Conradson) Carbon residue of petroleum products. It determines the amount of carbon residue formed after evaporation and pyrolysis of petroleum materials under certain conditions and is intended to provide some indication of the relative coke forming tendency of such materials.
Features:
1.The Carbon Residue Tester adopts all-in-one structure. It consists of two parts: electrical control chamber and high temperature heating furnace. The design is simple and reasonable.
2. The Micro Conradson Carbon Residue Tester adopts single chip machine system. The instrument controls the whole procedures automatically according to program preset.
3. The Micro Carbon Residue Tester controls the flow rate of nitrogen, temperature heating rate and preset temperature automatically. Easy to adjust the flow rate. The heating rate is accurate and temperature control is stable.
4. It collects test data and calculates results automatically. It can print and save the data according to customer's requirements.
5. The measurement range of this instrument is 0.10% (m/m)~30.0%(m/m).The test result is equivalent to Conradson method if the carbon residue is higher than 0.10%(m/m).
6.The carbon residue apparatus can also be used to determine the petroleum products composed of distillate oils which carbon residue is lower than 0.10%(m/m). But the specimen shall be sampling to 10%(V/V)distillation residue according to GB/T6536(ASTM D86) firstly.
7. It equips a electric balance to achieve the automation of sample weighing and data input.
8. The Key Features of this instrument are: It can detect the micro residual carbon; It can realize the automation of sample weighing data input; The testing process is fully automated.
Main Structure:
1.Coke chamber(Heating furnace):The sample is placed in the chamber to coke.
2.Cover of coke chamber(Cover of heating furnace):Specially designed for coke chamber.
3.Air outlet:The exhaust gas will be removed outside by a exhaust pipe from the coke chamber through the air outlet.
4. Screen:Colored touch-type LCD. It is used to input and show parameters.
5. Cooling rack
6. Printer:Needle printer
7.60ml/min control valve
8. 150ml/min control valve
9. Power wire:250V/16A
10 .Communication port:It is the serial port communicating with computer.
11.Power switch:The power switch of instrument.
12. Flowmeter:It shows flow rate of air source.
13. Pressure adjusting knob:
14. Pressure gage:It shows the pressure of air source.
15.Condensate collecting tank: It is used to collect the condensate in the coke chamber.
Parameters:
| 1 |
Power supply |
AC(220±10%)V, 50Hz |
| 2 |
Maximum power consumption |
1600W |
| 3 |
Temperature of coke chamber |
500ºC |
| 4 |
Temperature control accuracy |
±2ºC |
| 5 |
Heating power |
1500W |
| 6 |
Ambient temperature |
5ºC~35ºC |
| 7 |
Relative humidity |
≤85% |
| 8 |
Dimension |
520mm×360mm×525mm |
Product test data chart:
ASTM D4530 Micro Conradson Carbon Residue Test Apparatus:
What service can our company provide you?
Pre-sale Service:
1. The professional sales team will reply to the inquiry in real time;
2. Customize suitable solutions according to the needs of different customers;
3. Provide product technical parameters/operation manuals and evaluation reports, etc.;
After-sale Service:
1.From the date of purchase within one year instrument, is a product quality problem free repair replacement, lifetime supply of maintenance and technical services.
2.Technical Support
(1)Our technical team supports our customers at all time with our long experience, expert advice and the unlimited spirit and always be for providing the best customer service.
(2)Training how to install the machine,you can arrange your engineer to our company to get free training.
(3)If necessary, we can also arrange our engineer to your company for training and commissioning at your cost.
3.The instrument has found anomalies or malfunctions please contact us to arrange the most convenient treatment options.
Packaging &Shipping:
Our product packaging has been proven over the long term and we usually have plywood boxes or wooden case with trays. We will arrange the appropriate packaging according to the weight and size of the goods. Of course, you can also choose the packaging form.
| Packaging |
The product will be packed in wooden case, and also can be packed by others ways as your request. |
| Both neutral and customized packing are available. |
| Shipping |
We can ship the goods to you by international express,such as DHL, UPS, TNT and so on. |
| And you can choose the appropriate way based on your timeline and budget. Besides, you can choose to use your own shipping agent. |
Contact Us:
Welcome to contact us talk about details if you are interested in Petroleum Products ASTM D4530 Micro Conradson Carbon Residue Test Apparatus.If you want to know more information,Don't hesitation, welcome your inquiry!Price can be negotiated !
Website: chinainstrument.en.made-in-china.com
Audited Supplier 
){kind=link}
){kind=link}