| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
* Fill sample in the test cup and put the test cup on the heater to heat the sample. The flash point of the sample is the lowest liquid temperature at which application of the test flame causes the mixture of the sample vapors and air around the sample to appear flash .
* To determine the fire point, the test is continued until the application of the test flame causes the sample to ignition and sustain burning for a minimum of 5 s
* The Open Cup Flash Point Tester Apparatus adopts SCM and electric circuit to form the signal collection, processing, output, and controlling system. The CPU will send orders to control the heater as per the temperature changes collected by the temperature sensor during working procedures, so that the sample temperature increases at a certain speed. The flame application interval, flame application time, and flash detection can be automatically controlled.
* Operation system will stop data-collection after the instrument detect the flash point automatically, and the flash point temperature will be locked on the LCD and printed out. If you need to determine the fire point, continue to heat the sample, the coverplate will rotate out automatically to cover sample cup for flameout after determining the fire point and sustain burning for a minimum of 5 s, then the test arm is automatically raised up, the test ends
| 1 | Power supply | AC ( 220±10% ) V, 50Hz |
| 2 | Temperature measurement | Range : room temperature ~ 400 °C |
| Repeatability :≤ 8 °C | ||
| Reproducibility :≤ 17 °C | ||
| Accuracy : 0.1 °C | ||
| 3 | Heating rate | Correspond with GB/T3536 and ASTM D92 |
| 4 | Igniting mode | Electric ignition |
| Gas flame diameter: 3.2mm ~ 4.8mm | ||
| 5 | Ambient temperature | (10 ~ 40) °C |
| 6 | Relative humidity | ≤ 80% |
| 7 | Maximum power consumption | 500W |
| 8 | Dimension | 520mm×380mm×310mm |
| 9 | Weight | 13kg |
| No. | Name | Unit | Quantity | Remark |
| 1 | Main unit | Set | 1 | |
| 2 | Cleveland oil cup | Piece | 1 | We can provide more if you required. |
| 3 | Ignition device | Set | 1 | |
| 4 | Thermometer | Piece | 1 | -6°C~400 °C, graduated scale is 2 °C |
| 5 | Thermometer support | Set | 1 | |
| 6 | Power supply wire (250 V 6 A) | Piece | 1 | |
| 7 | Fuse 5 A (Φ5×20) | Piece | 2 | |
| 8 | Latex tube Φ6 | Meter | 1.5 | Could not be used as coal gas tube |
| 9 | Joint for coal gas tube | Piece | 1 | Connect coal gas tube and latex tube |
| 10 | Extinguishing cover | Piece | 1 |
Our ASTM D92 Cleveland Open Cup Flash Point Tester Apparatus product packaging has been proven over the long term and we usually have plywood boxes or cartons with trays. We will arrange the appropriate packaging according to the weight and size of the goods. Of course, you can also choose the packaging form.
If you are interested in our ASTM D92 Cleveland Open Cup Flash Point Tester Apparatus product or have any questions, please feel free to contact us.
){kind=link}