IEC 60332-3-10 Bunched Wire And Cable Vertical Flame Spread Tester EN 50399

• Customization: Available
• After-sales Service: Technical Support,Online Service
• Warranty: 1 Year
• Model NO.: GD-IEC 60332-3-10
• Standard: IEC 60332-3-10,UL1685,EN 50399
• Size: 1000(L)*2000(W)*4000(H)
• weight: About 500kg
• Power: 220 V AC, 60 Hz, 10 A
• Thermal puppet: 2mm
• Box insulation coefficient: 0.7W/m2K
• Utilities: Propane Gas Valve System, Ignition System
• Manual: Provided
• Transport Package: Standard Wooden Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• Production Capacity: 100PCS/Month

Product Description

 

Product Description

Introduction:
The wire and cable bundle combustion tester is designed according to the requirements of the wire and cable bundle combustion test in UL1685 and GB18380.3 standards. It also complies with IEC 60332-3-10, KS C IEC 60332-3-21~25 (A~D categories) standards.
The instrument, the power cables, the control cables, and the fiber optic cable bundle burning test preparation measures are all used to bundle cable or fiber optic cable to detect vertically mounted under specific conditions for vertical flame spread inhibition.
This instrument can be used to test for vertical flame vertical flame vertical diffusion to electric cables and wires of state when given a specified quantity of housing supply of gas and the usage of standard ignition source of ignition. Additionally, whether the IEEE 383 (IEEE 1202) testing standards can achieve the tester burner adjustment of 20 degrees. Heat release instruments can be configured inside the equipment, and a gas analyzer can measure thermal power values such HRR (heat release rate), SPR (smoke generation rate), and others.

Standard

• UL1685
• IEC 60332-3-10
• EN 50399
• GB/T 18380.31

Product Parameters

Name	bunched cable and wire fire flame spread tester
standard	IEC 60332-3-10
size	1,000(w) × 2,000(D) × 4,000(H)
power	220 V AC, 60 Hz, 10 A
weight	About 500kg
Utilities	Propane Gas Valve System, Ignition System

Features

1. The size of the stainless steel test box is 1,000±100(W) x 2,000±100(D) x 4,000±100(H) mm. The inner surface of the box is higher than the ground, and the back side is covered with thermal insulation materials.
2. Equipped with a stainless steel ladder according to the standard requirements, according to the steel ladder required by GB/T18380.31;
3. Two spare test racks;
4. The steel ladder is made of stainless steel; corrosion-resistant; easy to clean;
5. In the lower part of the box, there is an air inlet of 800±20(W) ×400±10(D) at a position 150±10mm away from the front of the box.
6. A thermocouple K-type armored thermocouple with a diameter of 2mm is installed on the inside of the box
7. The air flow in the combustion furnace can be stably controlled at (5000±500)L/min.
8. Stainless steel exhaust pipe and related accessories;

Packaging & Shipping

Packing Details	wooden case for IEC 60332-3-10 bunched cable and wire fire flame spread tester
Ports	Shanghai, Guangzhou, Shenzhen, etc
Lead Time	30 Business Days