| Customization: | Available |
|---|---|
| After-sales Service: | All Life Technical Supports |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction:
IEC 61034 Cable Smoke Density Apparatus Wire Flame Test Instrument is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burned under definite fire resource in the specified condition (3m3 chamber required by IEC61034).
This equipment IEC 61034 Cable Smoke Density Apparatus Wire Flame Test Instrument is important to measure the smoke generation from the value of light source penetration through the smoke generated when the cable is exposed to the specified standard fire source (ethanol 90±1%, methanol 4±1% and distilled water 6±1%) 1L±0.01L is burned.
Features:
The chamber's internal area is 3000mm±30mm and it's structured as a Cubic Enclosure with an appropriate fixed iron frame angle.
- It's configured with a door with test glass windows and on both faces of the opposite side there's a sealed transparent window (minimum 100mmX100mm) with a horizontal light measure system that allows light penetration.
- Designed to prevent direct sunlight exposure and severe weather changes in the Enclosure.
- Photocell and Light Source are located in the middle part of both windows of the wall surface on the opposite side to avoid physical contact.
- A lamp to provide regular light is installed.
- Two types of auto Filter systems (Carousel) are installed to calibrate the transmissivity of light automatically.
- The reduction of light by smoke is measured using Photocell.
- In order to verify accordingly the intensity of radiation to measure light change by self-emission, the equipment has been designed to fit various kinds of filters in the Light Source.
- Support system to allow separate fitting of Light Source and Photocell in the outer wall.
-The Light Source is a halogen lamp with a clean crystal lamp and tungsten filament.
- Average power : 100W, Average voltage: DC12v, Average velocity of light : 2000 lm~3000 lm, and Average color temperature : 2800K~3200K.
- The Receptor Photocell is selenium or silicone type and has a spectrum reaction conforming to Photopic Observer (similar to a human eye) of the International Commission on Illumination (CIE).
- A heating system is installed within the cube to swiftly match the standard temperature (25ºC±5ºC) in the initial test.
- We seek the tester's safety and convenience through an Auto ignition system.
Specification:
| Product name | IEC 61034 Cable Smoke Density Apparatus Wire Flame Test Instrument |
| Control way | Computer |
| Power | 220VAC 3A 50Hz |
| Weight | 500KG |
| Model | GD-IEC61034 |
| Exhaust Blower Power | AC220V, 60Hz, φ1, 210W |
| Transparent sealed window | 100*100mm |
| size | 3,000(W) × 3,000(D) × 3,000(H) |
| Exhaust Blower Size | 246(W) x 220(D) x 205(H) mm |
Our Company:
Since 2008, Chongqing Gold Mechanical & Electrical Equipment Co., Ltd. has developed 70 kinds of fire testing instruments and served many industries such as building materials, aviation, rails, IMO, wire & cable, safety protection, and so on.
Our mission is to provide reliable products to our customers to meet their requirements of testing, R&D, and quality control. In addition, Gold insists on high-quality standards in niche markets and targets to minimize the gap between Chinese local products and imported products.
We work with trust, honesty, and a sense of responsibility, so quality and service are always our advantages over all competitors.
){kind=link}