| After-sales Service: | All Life Technical Supports |
|---|---|
| Warranty: | 12 Months |
| Item Name: | En 1363-1 Combustion Tester Flammability Analyzer |
| Standard: | En 1363-1 |
| Application: | Flammability Analyzer for Building Materials |
| Channel: | a Total of 240, Bipolar Difference |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier EN 1363-1 Building Component Fire Test Vertical Furnace
Introduction:
EN 1363-1 Combustion Tester Flammability Analyzer For Building Materials provide important information for evaluation samples and Assembly properties. EN 1363-1 Combustion Tester Flammability Analyzer For Building Materials is a quantitative method of material vertical position and ability to withstand high temperatures. This EN 1363-1 Combustion Tester Flammability Analyzer For Building Materials can be used for the evaluation of fire-resistant products, such as walls, doors, air dampers, connections and infiltration sealing agent. Evaluation samples a number of features, including load-carrying capacity, fire control, heat transfer, and so on.
EN 1363-1 Combustion Tester Flammability Analyzer For Building Materials is designed to comply with the relevant parts of building materials in the fire resistance test of EN1363-1, 1363-2 hydrocarbon curve and relevant requirements of ISO standard 834, and is similar to other States of the relevant provisions. The equipment was specifically designed and after years of improvement, formed a kind of test specimens configuring reliable and accurate methods and necessary parts of the combustion chamber, which can be placed on the combustion chamber contains samples of various types of restrictive framework. The control at a specific time, temperature and pressure conditions, the response to heating of the sample to evaluate specific performance standards.
Standard:
EN1363-1
ISO 834,GB/T 9978
Feature:
• The inner space of EN 1363-1 Combustion Tester Flammability Analyzer For Building Materials is 3000mm (w) x 3000mm (h) x 1300mm (d), Lined with 1400 class insulation bricks, refractory filling block, and the slag plate.furnace top laying with special-shaped brick and lined with refractory material in situ.
• In some regions apply diatomaceous earth insulation and the super thermal insulation material at low temperature, in a hazardous area and base of the combustion chamber all for to cement the connection as much as possible using the 42% dense alumina refractory brick lining in the 6-hour high temperature during the test will provide sufficient insulation.
• Fixation of available customized vertical test samples for testing.
• Refractory insulation brick used in heat-resistant lining, refractory filling block, and the slag plate.
• Top shop special-shaped brick and lined with refractory material.
• Furnace using low carbon steel, reinforced with c channel steel and h-beams, steel resolve hot deformation.
• Sample fixed boxes mounted on the furnace front, fixed by four sets of doors.
• Cold noodles with inorganic fiber pad, heat-resistant insulated bricks along with the wall pad, shop in situ high-temperature blocks.
• Four observation port is located on the long side of the wall, use heat-resistant quartz glass, clever, convenient operators watch the whole sample in a test case.
• Air cooler insulating frame lightweight aluminum fiberboard sliding doors without using an observation port, slide the door blocking the oven available in the heat.
• Twelve specialized luminous flame burner. Each fuel burners are fitted with flame supervision devices to ensure combustion safety.
• Use button switches at any time automatically inserted into the mouth, according to the preset heat curve light burning mouth, such as the BS 476-DI20-24bu, EN 1363 and IMO the hydrocarbon curve. Manual control can be lit to specify a burning mouth.
• The three genuine leaks smoke cross-section is circular, each of which contains an airlock. These three air brakes are a round of high-level stainless steel structure and its shaft water cooling. Flue liner here for biodegradable ceramic fiber material.
• EN 1363-1 Combustion Tester Flammability Analyzer For Building Materials using low carbon steel, reinforced with c channel steel and h-beams, solve the thermal deformation of the steel issue, designed as a strong deformation structure. Strengthening plates for burners, hole, thermocouples, pressure and monitoring points provide holes. The steel frame is designed to ensure that you have considered the use function. The durable nature of the equipment to ensure its life expectancy in a test environment.
Technical Feature:
In line with the latest regulations of the thermocouple, location, and design:
It would provide the nine thermocouples in the posterior wall of the furnace. Accessories in the packaging, we will supply the right kind of nickel-iron alloy pipes, to support the delivery of the thermocouple.
In line with the latest regulations of pressure points, location and design:
Place 2 on each side of the combustion chamber wall of nickel-iron alloy pipes, end of the tube "t" shape. Pressure points are all connected to the field wiring of the inverter.
LP gas industrial high-temperature light soft flame burner:
Burner upright position, 6 on each side wall about the burning mouth. Burning mouth using LPG. Equipped with all fire safety systems, intermittent ignition systems, and temperature sensors.
Lifting frame and the fixed sample box:
Two sets of frameworks used in vertical samples. High-temperature resistance of precast blocks arranged in a stainless steel frame, high temperature, and lining. These frameworks are to be load-bearing framework. Another separate lifting with two side hooks for lifting samples box to the furnace. Vertical and horizontal sample boxes easily into the furnace.
Refractory lining of the connection pipe and chimney:
Chimneys made of low carbon steel 9mm, the former 6m with heat-resistant inner lining. On top of the chimney into the furnace high temperature at least 3 meters from the location, but also according to the required specifications for the design of chimney.
Burner air intake fan:
The combustion air system is pumping well before the current test.
Temperature sensors and pressure gauge:
Equipped with 9 K-type thermocouples, one flat type thermocouple, a pressure gauge and a thermocouple at normal temperature for assembly.
Observation window:
After four in the furnace wall, made of heat-resistant glass, air-cooled, connect the supply tubes and stainless steel insulated thermal panels. Alternatives to the viewers are the aperture of the camera.
Motorized Pressure Controlled Dampers:
Gas will go through three openings into the ducts to the furnace back, then to theflue of common ground. The three air brake is driven by the motor, control the pressure of the combustion chamber. The air brake has to be cooled by water and it requires customers to provide water and drainage.
Electrical installation:
All solenoid valves, safe box, spark plugs, fire detectors, vacuum and overpressure switch, electric valves and lock in the security limit switch will be made to connect field wiring terminal junction box by the installation engineer.
PLC and computer control:
PLC systems formed by Siemens PLC CPU and SIEMENS Compatible Remote I/O. Fire data management software is written according to the customer's requirements to collect and store test data.It meets BS 476 part 20-24, EN 1363 and IMO hydrocarbon curve heating requirements. Other standard time-temperature curves can also be programmed into the system in advance. The PLC controller includes a built-in operating interface, including the required recording and programming capabilities, as well as the necessary motor starter for all systems. The system programming can heat the curve in real-time and shows the boiler control system on computer screen.
Data recording system with dual recording:
Record the data on the computer and during the test period, it displays the real-time analysis data of the test samples. The EN 1363-1 Combustion Tester with Competitive Price can spread its screen display on a standard computer network and any computer connected to the network can log in to the test information. The facility can be used to provide test data to observers in the laboratory. All records are automatically saved to another computer.
Manual control:
The EN 1363-1 Combustion Tester with Competitive Price can be operated manually. The complete ignition system is not in any way dependent on the operation of the control computer. Press the clear start button to light the stove. A series of light instructions to clear the sequence correctly. Once they are on a separate burner Control Panel lighting up all the available at the pre-set time burner. If the EN 1363-1 Combustion Tester with Competitive Price is not lit during that period, the system will have to be removed. Each region of the position of the air and gas damper motor can be adjusted individually or by a group of the main control regulation. During the test, the safety of the furnace is monitored by a set of interlocking devices, each of which has its own indicator light. The interlocking devices are closed so that the linkage of the furnace closure is captured and maintained to the manual reset ignition sequence and an audible alarm device installed.
Specification:
| Product Name | EN 1363-1 Combustion Tester Flammability Analyzer For Building Materials |
| Channel | A total of 240, bipolar difference |
| Connector | 4 mm round socket (per channel 2). Other types of requirements are available |
| Input range | DC voltage of 5 mv , 50mv , 500 mv, 5000mv (software programmable) |
|
Basic resolution |
21 bit |
|
Basic accuracy |
0.005%FS |
| Measuring speed | 1 ms to 3 seconds (software programmable) |
| Cold-junction compensation | Absolute compensation +0.1ºC |
| Computer interface | RS485 75 ohm twisted pair |
| Power supply | 200-240 VAC or 100 -130VAC or 24VAC 40 -70Hz |
|
Power consumption |
7VA |
Our Services:
*Consulting support
*Sample testing support
*Factory Visiting
*Training support
*Installation support
*24 Hours &7 days service
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}