IEC 60332-1 Single Cable Analyzer Vertical Flame Spread Testing Equipment

• Customization: Available
• After-sales Service: All Life Technical Supports
• Warranty: 12 Months
• Model NO.: GD-IEC60332-1
• Item Name: IEC 60332-1 Single Cable Analyzer Vertical Flame
• Standard: IEC 60332-1-1,2,3; En 50086-1-1994
• Application: Single Cable Fire Tester
• Operating Voltage: AC210-230V 50Hz
• Ambient Temperature: Room Temperature ~ 40degree
• Gas Pressure: 0.1MPa
• Gas Purity: Propane> 95%; Compressed Air
• Timing Accuracy: 0.1s
• Model: Gd-60332-1
• Size: 600(W)* 450(D)* 1250(H)mm
• Power: AC 220V, 50/60Hz, 3A
• Weight: 60kg
• Manual: Provide
• The Torch Angle: 45 Degree; 0 Degree, Adjustable
• Transport Package: Standard Wooden Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

IEC 60332-1 Single Cable Analyzer Vertical Flame Spread Testing Equipment

 

Introduction:

Wire and Cable is the second-largest industry. IEC 60332-1 Single Cable Analyzer Vertical Flame Spread

Testing Equipment is the most widely used and low-cost cable fire performance test equipment;

Single wire or cable burning tester meets the national standard GB /T18380.11-2008 / IEC60332-1-2 requirement. It is to test the flame retardant insulation layer under fire conditions applicable for testing wire and cable in overheating, over-current, and another non-normal state. It can be used for vertical or fiber optic wire and cable flame spread tests, and test combustion conditions of Dettol matter under fire conditions.

 Standard:

IEC 60332-1-1,2,3;
EN 50086-1-1994;
GBT 18380.11,12-2008 

 

Main features:

1. Touch screen intelligent control system; English user interface;

2. Automatic ignition system, automatic timing, automatic data storage;

3. The test section and the control section is combined design in one box for operation;

4. Stainless steel test box, the internal cavity size: height 1200mm, width 300mm, depth of 450mm;

5. A pre-mixed burner, with an inner diameter of ¢ 12 ± 0.5mm, a length is 100mm. 1KW hybrid standard burner, which provides an accurate test fire source;

6. The flame burning applied time and hold time can range from 0 to 99 minutes99 seconds range adjustment. Automatic control of the testing process;

7. Imported needle valve precisely adjusts the flame height, according to standards, the blue flame;

height is 50mm ~ 60mm, total height 170mm ~ 190mm;

8. The gas flow rate is controlled by a needle valve;

9. Equipped with a flame height caliper;

10. Equipped with a gas flow meter and pressure regulator; automatic ignition;

11. The torch angle:  45 -0 degrees adjustable;

12. The flame calibration device is optional.

Specification:

Product name	IEC 60332-1 Single Cable Analyzer Vertical Flame Spread Testing Equipment
Operating voltage	AC220 V ± 10V 50HZ
Ambient temperature	room temperature ~ 40 ºC
Gas Pressure	0.1MPa
Gas purity	Propane> 95%; compressed air
Timing Accuracy	0.1s
Size	600(W)*450(D)*1250(H)mm
Power	AC 220V, 50/60Hz, 3A
Weight	60kg
Manual	Provide