Slurry Mixture Load Wheel Rolling Tester Asphalt Testing Equipment

• Customization: Available
• After-sales Service: Lifetime Technical Support
• Warranty: 1 Year
• Model NO.: GD-0755
• Max Diameter of Workpiece: 500mm
• Mass Scope of Workpiece: <900kg
• Type: Petroleum Products Solidifying Point & Cold Filter
• Maxcapacity: ASTM D88
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Rotation Speed of Motor: 1400 Rpm
• Rolling Frequency: 44 Times/Min
• Radius of Crank: 150 mm
• Loading Weight: Total Weight of Vehicle and Addition Weight Is 56.
• Moving Distance of Vehicle: 300 mm
• Hardness of Rubber Wheel: 70
• Sample Plate: 77mm*407mm, Made of Stainless Steel
• Power Supply: Three Phases, 380 V/50 Hz
• Motor Power: 550 W
• Transport Package: Wooden Case
• Specification: 620mm*460mm*355mm
• Trademark: GOLD
• Origin: China
• Production Capacity: 200units/Month

Product Description

Slurry Mixture Load Wheel Rolling Tester Asphalt Testing Equipment

Brief introduction:
The Load Wheel Rolling Tester is used to measure the emulsified bitumen slurry seal mixture of whether there is an excess of asphalt, to control the upper limit of asphalt used in the slurry mixtures, it can confirm the best asphalt content of slurry mixtures together with wet wheel abrasion test.

Main technical features:
1. The load wheel rolling test instrument is a floor structure, the structure design of the instrument, and test apparatus of the specifications of the size are accord with the requirement of T0755 standard. 
2. Mechanical transmission part design with safety protection device to prevent misidentification of the operator, safe and reliable.
3. Rolling frequency set by the operator in advance, when testing instrument automatic counting at work, until the count value is equal to the set point count stop, the instrument stop working.

Main structure:
The instrument is mainly composed of electric motor, transmission gear box, transmission crank, truss arm, weight box, rubber trundle and electrical controller with digital counter.

Main technical specifications:
1. The instrument is a floor structure, the structure design of the instrument, and test apparatus of the specifications of the size are accord with the requirement of T0755 standard. The design is novel, the structure is stable, and the use is convenient.
2. Mechanical transmission part design with safety protection device to prevent misidentification of the operator, safe and reliable.
3. Rolling frequency set by the operator in advance, when testing instrument automatic counting at work, until the count value is equal to the set point count stop, the instrument stop working.

Rolling frequency	44 times / min ± 1 times / min;
The crank radius	152mm ± 2mm;
Rubber wheel dimensions	diameter 76.5mm ± 1mm, width of 26.0mm ± 1.0mm;
Rubber wheel hardness	Between HRC60 ~ HRC70;
Rubber wheel loading weight	total weight of the car lay flat 56.7kg ± 0.5 kg;
Test mode	There are 6.4mm, 12.7mm thickness of two kinds, according to the need to use the internal dimensions of 50mm × 380mm;
Sand frame	internal dimensions of length 355.0 mm × width 38.0 mm × thickness 0.5 mm;
Steel plate	dimensions of length 353 mm × width 36 mm × height 3 mm;
Dimensions	1400mm × 260mm × 450 mm (length × width × height);
Power Supply	AC380V, 50Hz, 550W (three-phase four-wire system, with zero line).

Optional accessories:
1. Platform balance: Weighing 100g, the sense of it not more than 0.5 kg;
2. Balance: Weighing 2000g, the sense of it not more than 1g;
3. Oven: With forced ventilation, temperature can be controlled at (60 ± 3) ºC.

Package list:

No.	Name	Unit	Qty	Memo
1	Load Wheel Rolling Tester	Set	1
2	Test mode baseplate	Block	1	Stainless steel,installed at the bottom of seat
3	Test mode,thickness 6.4mm,12.7mm	Piece	Each 1	Plastic parts
4	Sand frame(the bottom posted with rubber sand frame)	Piece	1	Metal sand frame,installed at bottom
5	Steel desk-plate	Piece	1
6	Rubber sand frame(Posted with 3 M double side tape)	Piece	1
7	Fuse 10A(Ф6×30)	Piece	2
8	Butterfly nut	Piece	8
9	Tall Pressing plate	Piece	8
10	Support wooden bracket	Block	1	Placed under the machine to hang the rubber wheel in the air
11	Operation manual	Piece	1

Product details:

 

Workshop:
Chongqing Gold Mechanical&Electrical Equipment Co., Ltd is a professional manufacturer of Petroleum Products test kits and electrical testing equipment in China. Our products are sold to most countries in the world and they are highly popular because of our good quality and after-sale service.
At present, there are more than 150 employees, of whom more than 70% are technical personnel with a college degree or above. With strong technical force and strong development, new products have been launched continuously.
We have developed sales channels in many countries such as the UAE, Saudi Arabia, Iran, Malaysia, Thailand, Pakistan,India, Germany, Belgium, the USA, Mexico, Kenya, Nigeria, South Africa, and other countries worldwide. And we have gained a strong advantage and high reputation in the international market. After several years' development, our products have become highly intelligent and wide coverage. And our company has become one of the leading manufacturers of petroleum testing instrument and electrical testing instrument.
What service can our company provide you?
Pre-sale Service:
1. The professional sales team will reply to the inquiry in real time;
2. Customize suitable solutions according to the needs of different customers;
3. Provide product technical parameters/operation manuals and evaluation reports, etc.;
After-sale Service:
1.From the date of purchase within one year instrument, is a product quality problem free repair replacement, lifetime supply of maintenance and technical services.
2.Technical Support
(1)Our technical team supports our customers at all time with our long experience, expert advice and the unlimited spirit and always be for providing the best customer service.
(2)Training how to install the machine,you can arrange your engineer to our company to get free training.
(3)If necessary, we can also arrange our engineer to your company for training and commissioning at your cost.
3.The instrument has found anomalies or malfunctions please contact us to arrange the most convenient treatment options.

Contact Us:
Welcome to contact us talk about details if you are interested in Slurry Mixture Load Wheel Rolling Tester Asphalt Testing Equipment.If you want to know more information,Don't hesitation, welcome your inquiry!Price can be negotiated! 
Website: chinainstrument.en.made-in-china.com