| Customization: | Available |
|---|---|
| After-sales Service: | Provide |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Steiner Tunnel Test Furnace Horizontal Combustion Testing Apparatus is conformance to UL910,ASTM E84 and several standards;This test method is a 10-minute fire test response standard designed to provide comparative measurements of flame spread and smoke density over select grades of red oak and fiber cement board surfaces under specific fire exposure conditions.
The ASTME84 test method determines the relevant combustion characteristics of the sample by observing the flame propagation along the sample. The test report is expressed as the flame spread index and smoke development index.
FSI (Flame Spread Index) and SDI (Smoke Development Index) are important parameters for evaluating the fire protection grade of ASTM E 84 test.
Guideline
standard
UL910
ASTM E84
UL723
NFPA262
Structural features:
1. The combustion box is made of stainless steel and refractory bricks are laid inside; it has good thermal insulation performance. The internal dimensions of the combustion box are 305mm x 451mm, and the length is 7.6m;
2. The internal tooling fixtures are all made of stainless steel and are rust-proof and corrosion-proof;
3. The double-layer quartz glass observation window can observe the flame spread distance, and the position of the flame advance can be displayed through the indicator light.
4. The height of the combustion box is suitable for personnel to observe the combustion status, install it, and adjust the sample;
5. The overall design of the combustion box cover adopts a water tank sealing design according to standards.
6. The box cover is made of refractory materials and stainless steel. Equipped with lifting hook device;
7. The sample holder is equipped with a cooling water circulation support bracket, which is resistant to high temperatures in combustion tests;
8. The distance between the double-head burner and the air inlet is 1320mm;
9. Stainless steel exhaust pipe, beautiful and corrosion-resistant;
Combustion System
1. 10kV spark igniter, equipped with safety stop-fire device. The ignition is automatically positioned by a lever connected to the closing mechanism;
2. The combustion heat of the burner is automatically controlled through the automatic gas flow control system. Reading accuracy is 1%;
3. Bipolar gas flow valve control system; avoid system leakage caused by solenoid valve failure, resulting in explosion risks;
4. The variable frequency fan automatically controls the wind speed in the flue; the fan power is 3KW and the voltage is 380V;
5. Taiwan brand gas pressure gauge and pressure regulating valve to accurately control gas pressure;
6. Imported gas flow control valve to accurately control gas flow;
test system
1. Smoke density analysis: Use incandescent light system to measure smoke density: color temperature 2900±100K; current fluctuation range ±0.5%; smoke density value linear output; and with time compensation function;
4. The lens condenses the light into a 20mm parallel beam; d/f <0.04;
5. Detector; spectral distribution correspondence is consistent with CIE; chromaticity standard function accuracy is ±5%; output linearity is within 3% of the light transmittance or within 1% of the absolute light transmittance; 90% of the system's response time No more than 3s;
6. The thermocouple is a K-type armored thermocouple with a diameter of 0.5mm; the temperature accuracy is 0.5ºC;
7. The pressure sensor range is 0~100pa; connected to a pressure sensor with an accuracy of ±2pad; the response time of 90% of the pressure sensor output is at most 1s;
8. Environmental pressure accuracy ±200Pa;
9. The system recording time is at least 3 seconds;
10. System time recording accuracy is 0.1s;
11. Automatically check the flame spread distance;
12. Computer animation shows the flame spreading state, and you can know the flame spreading state without going near the combustion box;
13. The computer displays the smoke density generation curve in real time;
14. Automatic calibration function for smoke density and light transmittance; preventing smoke dust from adsorbing on the lens and affecting the light transmittance results;
computer control system
1. Standard control cabinet, embedded integrated 10.2" LCD screen:
• Labview dedicated laboratory software control system; the system is stable and reliable;
• Control parameter setting and display; test status and fault display and query.
•Data USB export. Historical curve and data query and printing;
•Can independently control the machine to complete the test.
2. It has sound alarm and alarm accident display functions.
3. There is a USB/RS232 serial port on the control box, which can be externally connected to a desktop/laptop computer for operation and control.
4. •Programmable controller (PLC) control system:
•Automatic ignition, ignition failure detection and protection.
•PLC+frequency converter implements automatic control and display of exhaust gas flow.
•Automatically measure and calculate material combustion: heat release rate (H.R.R), smoke growth index (SPR), oxygen consumption (O2), and CO2 production.
Optional heat release test system (this test data is an optional test, not a required test item):
gas sampling system
1. High-precision patented design sampling system; ensures that the sampling gas entering the gas analyzer is stable and free of impurity interference; making the analyzer analysis results more accurate;
2. Including particulate filter: three-stage filtration system, filtration accuracy 0.5um;
3. Cold trap: compressor principle refrigeration system; gas sampling temperature control is 0~5ºC;
4. Suction pump: provides gas sampling power source;
5. Drying cylinder; separate oxygen and nitrogen dioxide analysis gas paths for drying and impurity removal;
6. High-precision ball valve; opens and closes the air path;
7. Flow controller.
gas analysis system
1. Oxygen concentration analysis: Paramagnetic oxygen analyzer, o2 measurement range 0-25%, linear deviation <1%. The response time of the oxygen analyzer does not exceed 12s; the maximum output resolution of the analyzer is 100X10-6;
2. CO and CO2 analysis: Infrared CO2 analyzer: CO2 measurement range: 0-2/10%, linear deviation: <±1%. The response time of the analyzer does not exceed 12s; the maximum resolution of the analyzer output is 100X10-6;
3. Collection and storage of various data; screen monitoring, real-time temperature curve, real-time CO2/O2 data curve display; historical curve and data query.
| Specification | |
| Control Table | 600(W)×750(D)×1,600(H)mm |
| Power | AC 380V, 50/60hz, 30A |
| Weight | 1500kg |
| Function | mainly used for the flame retardant performance test |
Introducing Your Lab to Its New Best Friend: Ultra-Accurate, Affordable Testing Equipment with Unparalleled Service!
Hey there! Are you ready to say goodbye to complex testing equipment and hello to our latest groundbreaking gadget? Introducing a state-of-the-art testing device that's not only accurate and easy to use but also comes with exceptional service support to ensure you get the most out of your investment.
Mind-Blowing Precision
Achieve unparalleled accuracy in your test results! Our device is equipped with cutting-edge sensors and advanced algorithms that deliver reliable, precise measurements every single time.
Smartly Designed
Functionality doesn't have to be complicated. Our user-friendly design philosophy ensures that each element is crafted for intuitive and seamless operation, making it nearly effortless to get started.
Simple Operation
Experience the simplicity of setting up and operating our equipment. With minimal training required, you can unbox, set up, and start testing immediately - it doesn't get any easier than this!
Compared to similar products, here's why we stand out:
- Unrivaled accuracy that eliminates large margins of error;
- Compact design that maximizes your lab space;
- User-friendly operations that save time and reduce errors;
- Top-notch service support to assist you every step of the way.
We provide more than just a product; we offer a complete solution tailored to the needs of wire and cable manufacturers, colleges and universities, commodity inspection departments, and research units. Enjoy peace of mind with our industry-leading service and support team, ready to help you whenever you need it.
Don't miss this opportunity to elevate your lab gear and revolutionize your workflow. Upgrade today and experience unparalleled ease, reliability, and service with our innovative testing equipment.
Q: What about the transportation?
A: We can delivery by air to your airport, or by sea to your seaport, and we can als(
delivery to your company by express.
Q: What about the Voltage?
A: We can change the voltage as your requirement, you can confirm the voltage to
us before delivery.
Q: What about the after-sale service?
A: Guarantee period is 12 months, after the warranty, we also provide life-long paic
repair or service. Response within 24 hours for any problems. Overseas training
installation is available.
Q: What about the delivery date?
A: The test machine most are in stock,can delivery within 2-5 working days after
received the payment.We can also accept the urgent order for prompt shipment.
Q:What is the payment term?
A: Payment by T/T, L/C ,Western Union
){kind=link}