Needle Flame Test Chamber IEC60695-2-2 Needle Flammability Test Equipment

• Customization: Available
• After-sales Service: All Life Technical Supports
• Warranty: 12 Months
• Model NO.: GD-IEC60695-2
• Standard: IEC 60695-2-2
• Test Power: 220V / AC, 50h
• Dimensions: 1120 (L)* 520(W) * 1250(H)mm
• Temperature Sensor: K-Type Insulation-Sheathed Thermocouple
• Temperature Range: 0--1000c
• Flame Height: 12mm+-1mm
• Combustion Gases: 95% Butane Gas or Propane Gas
• Transport Package: Plywood Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

Needle Flame Test Chamber IEC60695-2-2 Needle Flammability Test Equipment

Introduction:   

Needle Flame Tester is in accordance with national standards GB4706.1-1998 to design and produce .The tester applies for lighting, low-voltage electrical equipment, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, electrical connectors, accessories and other electrical and electronic equipment and parts, component research, production and quality control departments and insulating materials , plastic or other solid combustible materials industry to carry on  small-flaming ignition experiments.

Needle flame tester uses standard size (Φ0.9mm) needle burner .and burns the sample with specific gas (butane) at the angle of 45 °.we determine the ignition risk of  the small-flame caused by fault conditions in the equipment by testing the sample burning situation, burning time and burning  length

Standard:   

GB4706.1,

GB5169.5-2008, 

IEC60695-2-2

IEC60695-11-5 etc.

Technical Parameters:   

1. Needle burner: stainless steel, the inner diameter of ¢ 0.5 ± 0.1mm, an outer diameter of not more than ¢ 0.9mm, length 35mm more needles, no air access;

2. The burner angle: vertical (when adjusting and measuring the flame height) or inclined 45 ° (the test)

3. Combustion gases: 95% butane gas or propane gas;

4. Ignited bedding layer: white pine plank (thickness 10mm), surface covering 12 ~ 30g / m2 standard tissue paper layer is applied at lower flame from 200mm ± 5mm

5. Temperature range: 0--1000 ºC

6. The flame temperature requirements: from 100 ± 2 ºC ~ 700 ºC ± 3 ºC, should be completed within 23.5 ± 1.0s;

7. The flame height: 12mm ± 1mm;

8. Shi burning time: 0s ~ 999.9s adjustable, generally set at the 30s;

9. Holding burning time: 0s ~ 999.9s, automatic recording, manual pause;

10. Test Space: ≥0.5m3, black background, (can be customized cubic 0.75 m3 or 1 m3 according to customer requirements);

11. Temperature sensor: K-type insulation-sheathed thermocouple (Φ0.5mm)

12. Test program automatic control, independent ventilation system;

13. Dimensions:1120 (L)* 520(W) * 1250(H)mm, exhaust Φ100mm;

14. Test Power: 220V / AC, 50H.

Product Image: