| Customization: | Available |
|---|---|
| After-sales Service: | All Life Technical Supports |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
NF P92 Thermal Radiation Dripping Tester
Introduction:
Thermal radiation dripping tester meets international standards NF P92-505, EU 95/28 / EC, ECE technical specifications and requirements of R118 Annex 7 of these Regulations. According to the NF P 92-505 request, the test is an additional test for M-class building materials. It is suitable for the hot melt material effect in the primary heat source to evaluate the performance of dripping and burning performance testing. Flexible and thin materials can be tested.
Standard:
NF P92-505
EU 95/28/EC
ECE R118 Annex 7
Main Feature:
1. All fixtures are made of stainless steel material, good appearance and corrosion resistance.
2. The radiation bracket can be rotated, the rotation angle is greater than 90 degrees, and easy to install the sample.
3. Sample installation height can be adjusted.
4. The radiation heat of the radiator is 30KW/m2, up to 100KW/m2.
5. The output power of the electric radiator is 500W.
6. The radiant heat radiator can be adjusted linearly through the power control automatic adjustment.
7. The radiation shield is a quartz glass and the opening diameter is 100mm ± 5mm.
8. The heat radiation reaches 3W / cm³ the position 30mm from the radiation shield plane.
9. The sample holder ring is made of stainless steel and the inner diameter is 118mm.
10. Take off the plate's inner diameter of 118mm, depth is 12mm, and an internal plug of cotton.
11. Radiation cone can move up and down.
12. Automatic timing warning of sample ignition.
13. Radiometer imported from the USA which range is 0~100Kw/m2.
Specification:
| Model | GD-NFP92 |
| Size | 500mm(L)×400mm(W)×700mm(H) |
| Power | 500W |
| Weight | 50KG |
| Gas regulator valve pressure range | <0.1MPa |
| Warranty | 12 months |
){kind=link}