| After-sales Service: | Lifetime Technical Support |
|---|---|
| Warranty: | 1 Year for Transformer CT PT Analyzer |
| Product Name: | CT PT Tester CT Volt-Ampere Characteristic Tester |
| Usage: | Transformer Tester |
| Test Standards: | IEC60044-1/2/5/6 |
| Voltage Output: | 0.1~180V (AC) |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier CT PT Tester CT Volt-ampere Characteristic Tester
Introduction
CT PT volt-ampere characteristic phase ratio polarity tester is mainly used for on-site testing of protection-grade CT and PT. The tester is easy to operate, fully computerized equipment, high-performance CPU, no manual operation required, and the test is completed automatically to prevent personal contact with high-voltage circuits. The maximum output voltage of the volt-ampere characteristic test reaches 1000V, the maximum output current of the ratio test is 600A, and the output capacity of the internal voltage regulator is 5KVA. It uses an LCD display and is equipped with a small built-in printer for on-site printing. It supports the use of USB flash drives to download data, and is simple and convenient to operate.
Technical Index
| 1 | Test standards | IEC60044 |
| 2 | Power supply | AC220V±10%,50Hz/60Hz±10% |
| 3 | Power output | 0.1~125V (AC) |
| 4 | Current output | 0.001~5A(RMS) |
| 5 | Power output | 3KVA |
| 6 | Max. knee voltage measurement | 45kv |
| 7 | Current measurement range | 0~10A (automatically change range in 0.1/0.4/2/10A) |
| 8 | Current measurement error | <±0.1%+0.01%FS |
| 9 | Voltage measurement range | 0~200 V (automatically change range in 1V/10V/70V/200V) |
| 10 | Voltage measurement error | < ±0.1%+0.01%FS |
| 11 | Turns ratio measurement range | 1~30000; 1~2000 error<0.05%; 2000~5000 error>0.1%; 5000~35000 error<0.2% |
| 12 | Phase measurement | error:±2min,resolution:0.01min |
| 13 | Coil resistance measurement | Range: 0~8kΩ(automatically change range in 2ohm /20ohm /80ohm/800ohm/8kohm) Error< 0.2%RDG+0.02%FS Maximum resolution: 0.1mΩ |
| 14 | Temperature measurement | -50~100 Celsius degree, error<3 Celsius degree |
| 15 | CT Secondary burden | Range 0-160ohm (automatically change range in 2ohm/ 20ohm/80ohm/160ohm) Error <0.2%RDG+0.02%FS Maximum resolution 0.001ohm |
| 16 | PT Secondary burden | Range 0-80kohm (automatically change range in 800ohm / 8kohm /80kohm) Error <0.2%RDG+0.02%FS Maximum resolution: 0.1ohm |
| 17 | PT ratio measurement | Range: 1~30000, 1~5000 error<0.2% 5000~30000 error<0.5% |
| 18 | Saved data groups | >1000groups |
| 19 | Work condition | Temperature:-10ºC-50ºC, moist:≤90% |
| 20 | Size | 70*50*41CM |
| 21 | Weight | 40kg |
Applications
1. Excitation curve and parameters test
2. Turns ratio test
3. Ratio and phase error test
4. Polarity mark check
5. Winding resistance measurement
6. Secondary loop burden measurement
7. Error line curve test for protection CT
8. Transient CT parameters test
9. CT nameplate guess
10. Saturation hysteresis loop curve measurement
Tests for Potencial Transformer :
1. Turns ratio test
2. Ratio error and phase angle error test
3. Polarity test
4. Secondary burden test
5. Winding resistance test
About CT/PT Analyzer software:
GDVA-405 Top-Rated Automatic Current Transformer and Potential Transformer CT PT Tester
Standard configuration
| Name | Quantity | Description |
| Host machine | 1 | |
| 3M mask cable | 2 | Test cable for power out and CT secondary connection |
| 10M mask cable | 1 | Test cable for CT primary connection |
| Grounding cable | 1 | |
| Big test pliers | 2 | One red and one black |
| Test gasket | 4 | Two red and two black |
| Test pin | 4 | Two red and two black |
| Test pliers | 12 | Three red and nine black |
| Short connection cable | 1 | Including six connection terminals |
| 3A fuse | 3 | |
| Power cable | 1 | |
| Accessories bag | 1 | |
| Production disk | 1 | Include Analysis application and user manual |
| User manual | 2 | |
| Inspection report | 1 | |
| Pass certificate | 1 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}