ASTM D1298 Liquid Density Meter for Crude Petroleum by Hydrometer Method

• Customization: Available
• After-sales Service: Lifetime Technical Support
• Warranty: 1year
• Model NO.: GD-1884
• Accuracy: ± 3%
• Maximum Measurement Range: ≤3D
• Density Meter Type: Reflection Density Meter
• Viscometer Type: Density Tester
• Density Meter Principle: Hydrostatic Density Meter
• Test Density: Light
• Power Supply: AC 220V, 50Hz
• Dimension of Constant Temperature Bath: 300*340mm
• Capacity of Cylinder: 500ml
• Temperature Controller: Range: Ambient to 100celsius
• Temperature Controller Accuracy: 0.2celsius
• Temperature Controller Sensor: PT100
• Thermometer: Mercury-in-Glass Thermometer
• Dimension: 560*380*580mm
• Transport Package: Wooden Case for Petroleum Product Digital Specific
• Specification: 560mm*380mm*580mm
• Trademark: GOLD
• Origin: China
• Production Capacity: 100 Sets/ Month

Product Description

ASTM D1298 Liquid Density Meter for Crude Petroleum

Product Description

Our ASTM D1298 Density Meter is designed and made as per ASTM D1298 Standard Test Method for Density, Relative Density(Specific Gravity),or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method.Density is an important indicator for automotive, aviation and marine fuels. It can affects storage, handling and combustion.It is used to determine the density of crude petroleum and liquid petroleum.

Significance and Use

1.Accurate determination of the density, relative density (specific gravity), or API gravity of petroleum and its products is necessary for the conversion of measured volumes to volumes or masses, or both, at the standard reference temperatures of 15°C or 60°F during custody transfer.
2.When used in connection with bulk oil measurements, volume correction errors are minimized by observing the hydrometer reading at a temperature close to that of the bulk oil temperature.
3. Density, relative density, or API gravity is a factor governing the quality and pricing of crude petroleum. However, this property of petroleum is an uncertain indication of its quality unless correlated with other properties.
4. Density is an important quality indicator for automotive, aviation and marine fuels, where it affects storage, handling and combustion.

 

Main Technical Features

1. This ASTM D1298 Density Meter is a kind of all-in-one machine. The control box adopts humanized design. The control switch adopts light-touch mode. Its structure is simple and compact. Easy to operate. 
2. It adopts intelligent LCD temperature controller. The control rate is fast and overstrike is small. The temperature control can reach ±0.2ºC.
3. It equips a hard glass vessel and electric stirrer. The temperature in vessel is uniform. Easy to observe the sample. 

Main Structure

1. Electrical heater
It is made of sealed stainless steel tube, providing heat for the constant temperature bath.
2. Motor-driving sitrring device
The motor stirring device. Input power: 25W, output power: 6w, rotation: 1200r/min, stirring balde:Ф50mm(Both the heating and stirring are proceeded in a protecting cover). It guarantee the constant temperature in the bath.
3. Temperature Controller
The LCD digital temperature controller.The sensor(Pt100)sends the signal to the temperature regulator. It automatically control the heating power of the electrical heater. 
4. Bathtub and bath cover
The bathtub is made of hard glass. There are tow holes for the density meauring flask and its holder on the bath cover. It enable to test two samples at the same time. There is a spare hole for the low temperature test.
5. Thermometer
Total immersion mercury thermometer with scale division of 0.2 ºC; The testing temperature range is -20~102ºC

Product Parameters

1	Power supply	AC(220±10%)V,50Hz
2	Dimension of constant temperature bath	Ф300mm×340mm
3	Capacity of cylinder	500ml
4	Heating power	700W,1000W
5	Temperature controller	Range:  Ambient to 100ºC
		Accuracy:  ±0.2ºC
		Sensor:  Pt100
6	Thermometer	Mercury-in-glass thermometer. Scale division is 0.2ºC
7	Dimension	560mm×380mm×580mm

Detailed Photos

 

Related products

Open Cup Flash Point Tester
Flash & Fire Point Tester for Petroleum Products
Closed Cup Flash Point Tester
Engler Viscometer
Water Content Tester
Rotational Viscometer
Kinematics Viscometer
Distillation Tester
Density Tester 
Rust and Corrosion Tester
Sulphur Content Tester
Acid and Alkali Tester
Dropping Point Tester
Demulsibility Characteristics Tester
Ash Content Tester
Aniline Point Tester
Low Temperature Tester(Including solidifying point, cold filter plugging point, pour point, cloud point, and freezing point)
Residue Carbon Tester
Existent Gum Tester
Vapor Pressure Tester
Bomb Calorimeter
OCTANE & CETANE ANALYZER
Lubricating Oils Foaming Characteristics Tester
Petroleum Products Color Tester
Petroleum Wax Oil Content Tester
Automatic Interfacial Tension Tester
Liquid Petroleum Products Hydrocarbon Tester
Lubricating Oil Air Release Value Tester
Petroleum Products and additives Mechanical impurities tester

FAQ

1. What's the payment method?
Payment can be done by cash T/T, L/C, Western Union, Alibaba Trade Assurance,etc.
2. How long is the delivery period?
Generally it takes about 10 working days for producing specific gravity hydrometer and then the delivery will be done timely. 
3.What's the package made of?
The package is made of international export standard wooden case. 
4.What's the delivery method?
By train, by air, by sea, by truck, by express, etc. 
5. How long is the guarantee period?
The guarantee period is 1 years. 
6.What services can you provide?
Online support through email, telephone, Whatsapp or other communication method;  technical video support, etc.

If you have interested in ASTM D1298 Liquid Density Meter for Crude Petroleum by Hydrometer Method , Don't hesitation, welcome your inquiry!Price can be negotiated !please feel free to contact with me:Chongqing Gold Mechanical&Electrical Equipment Co., Ltd
website: chinainstrument.en.made-in-china.com