Needle Flame Tester IEC 60695 Combustion Test Apparatus

• Customization: Available
• After-sales Service: All Life Technical Supports
• Warranty: 12 Months
• Model NO.: GD-IEC60695
• Application: Needle Flame Tester Plastic
• Standard: IEC 60695
• Mnaual: Provide
• The Burner Angle: 90 Degrees; 45 Degrees
• The Flame Height: 12mm ± 1mm
• Heating Rise Time: 23.5±1.0s
• Temperature Range: 0--1000 ºC
• Transport Package: Standard Wooden Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

Needle Flame Tester IEC 60695 Combustion Test Apparatus

Introduction: 

Combustion Test Apparatus Needle Flame Tester IEC 60695 is in accordance with national standards GB4706.1-1998 to design and produce. Combustion Test Apparatus Needle Flame Tester IEC 60695 applies for lighting, low-voltage electrical equipment, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, electrical connectors, accessories, and other electrical and electronic equipment and parts, component research, production and quality control departments and insulating materials, plastic or other solid combustible materials industry to carry on small-flaming ignition experiments.

Combustion Test Apparatus Needle Flame Tester IEC 60695 uses a standard size (Φ0.9mm) needle burner. And burns the sample with specific gas (butane) at an angle of 45 °. We determine the ignition risk of the small flame caused by fault conditions in the equipment by testing the sample burning situation, burning time, and burning length.

Standard:

GB4706.1

GB5169.5-2008

IEC60695-2-2

IEC60695-11-5 etc

Technical Parameters: 

Material	Stainless steel
The combustion gases	95% butane gas or propane gas
The burner angle	90° 45°
Subplate	white pine plank (10mm)  Surface covered by standard silk paper  200mm ± 5mm below the flame
Temperature range	0--1000  ºC
The flame temperature requirements	100±2 ºC~ 700ºC±3 ºC,
Heating rise time	23.5± 1.0 s
The flame height	12 mm ± 1 mm
Ignition time	0 s ~ 999.9 s adjustable, generally 30 s
Burning time	0s ~ 999.9 s, automatic recording, manual pause
Test Space	≥0.5 m3, black background, (can be customized cubic 0.75 m3 or 1 m3 according to customer requirements)
Temperature sensor	K-type insulation-sheathed thermocouple (Φ0.5mm)
Dimensions	L1120 * W520 * H1250mm,
The diameter of the exhaust	Φ100mm
Test power supply	220 V / AC, 50 Hz

1.  Needle burner: stainless steel, an inner diameter of ¢ 0.5 ± 0.1mm, an outer diameter of not more than ¢ 0.9mm, length of 35mm more needles, no air access.

2.  The burner angle: vertical (when adjusting and measuring the flame height) or inclined 45 ° (the test).

3.  Combustion gases: 95% butane gas or propane gas.

4.  Ignited bedding layer: white pine plank (thickness 10mm), surface covering 12 ~ 30g / m2 standard tissue paper layer is applied at lower flame from 200mm ± 5mm.

5.  Temperature range: 0--1000 ºC.

6.  The flame temperature requirements: from 100 ± 2 ºC ~ 700 ºC ± 3 ºC, should be completed within 23.5 ± 1.0s.

7.  The flame height is 12mm ± 1mm.

8.  The burning time: 0s ~ 999.9s adjustable, generally set at 30s.

9.  Holding burning time: 0s ~ 999.9s, automatic recording, manual pause.

10.  Test Space: ≥0.5m3, black background, (can be customized cubic 0.75 m3 or 1 m3 according to customer requirements).

11.  Temperature sensor: K-type insulation-sheathed thermocouple (Φ0.5mm).

12.  Test program automatic control, and independent ventilation system.

13.  Dimensions:1120 (L)* 520(W) * 1250(H)mm, exhaust Φ100mm.

14.  Test Power: 220V / AC, 50Hz.