Thermal Radiation Melt Drop Tester NF P92 for Building Materials

• Customization: Available
• After-sales Service: All Life Technical Supports
• Warranty: 12 Months
• Model NO.: GD-NFP92
• Item Name: Thermal Radiation Melt Drop Tester NF P92
• Reference Standards: NF P92 /EU95
• Model Number: Gd92
• Outline Demension: W1510*D650*H1220mm
• Power: 220V, 50Hz, 550W
• Weight: 13kg
• Maximum Power: 1kw
• Maximum Hight: 680mm
• Lampstand Size: 425*300mm
• The Gas Regulator Valve Pressure Range: <0.1MPa
• Size: 1900mmd* 460mm H* 2100mm W
• Sample Installation: Height Can Be Adjusted
• The Radiant Heat Radiator: Can Be Adjusted Linear Through The Power Control
• Delivery Time: to Be Negotiated
• Transport Package: Plywood Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• Production Capacity: 10

Product Description

Thermal Radiation Melt Drop Tester NF P92 For Building Materials

Image:



Introduction:

Thermal Radiation Melt Drop Tester NF P92 For Building Materials can be used for more than 5mm thickness of rigid and elastic material performance evaluation, and it is developed according to flame test standard NF P92-501.  

Thermal Radiation Melt Drop Tester NF P92 For Building Materials to provide 30KW / m2 heat radiation, which may lead to volatile flammable gas samples and trigger the combustion of volatile gases, and at the same time to observe the state of the flame spread through the material and estimate combustion heat release data. Suitable for railway vehicle test radiation test methods of fire-resistant material.

International standards:

NF P92-501, TB / T 2639.1,EU 95 ,ECE R 118 Annex7,etc. 

Features:

1, Stainless steel test cabinet, the inner wall is flame-resistant material with a transparent viewing window;

2, Stainless steel tubular inlet device, equipped with filtration device shield for indoor sources;

3, 45° of the test stand, equipped with stainless steel foot instructions to calculate the distance of flame spread;

4, Heat radiation device can provide 30KW / m2 heat flux;

5, The power controller controlling the radiation output, adjustable heat radiation;

6, The heat radiating panel displays the device operating power value, eliminating frequent calibration procedures;

7, The stainless steel burner can ignite the combustible gas automatically;

8, The imported needle valve can control the upper and lower burner flame height, with a flame height measuring;

9, Lasting small flame device is be ignited before the test to convenient upper and lower ignition burners;

10, One-quarter rotation stopper device to facilitate cutting the gas burner and ignite the flame;

Specification:

Product name	Thermal Radiation Melt Drop Tester NF P92 For Building Materials
Size	Length: 1900mm (74.8 inches)  Depth: 460mm (18.1 inches)  Height: 2100mm (82.6 inches)
Power	500W
Weight	13KG
Gas regulator valve pressure range	<0.1MPa
warranty	12 months