| Customization: | Available |
|---|---|
| After-sales Service: | All Life Technical Supports |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Vertical Flame Propagation Tester for Single Cable and Wire, IEC 60332
Introduction:
Wire and Cable is the second-largest industry. Single wire and cable vertical burning tester is the most widely used and low cost of cable fire performance test equipment. Single wire or cable burning tester meets the national standard GB /T18380.11-2008 / IEC60332-1-1: 2004 requirement. It is to test flame retardant insulation layer under fire conditions applicable for testing wire and cable in overheating, over-current and another non-normal state. It can be used for vertical or fibre optic wire and cable flame spread test, and test combustion conditions of Dettol matter under fire conditions.
Standard:
IEC 60332-1-1,2,3
EN 50086-1-1994
GBT 18380.11,12-2008
Main features:
1. Touch screen intelligent control system; English user interface.
2. Automatic ignition system, automatic timing, automatic data storage.
3. The test section and the control section is combined design in one box for operation.
4. Stainless steel test box, the internal cavity size: height 1200mm, width 300mm, depth of 450mm.
5. A pre-mixed burner, with an inner diameter of ¢ 12 ± 0.5mm, the length is 100mm. 1KW hybrid standard burner, which provides an accurate test fire source.
6. The flame burning applied time and hold time can range from 0 to 99 minutes99 seconds range adjustment. Automatic control of the testing process.
7. Imported needle valve precisely adjusts the flame height, according to standards, the blue flame height is 50mm ~ 60mm, total height 170mm ~ 190mm.
8. The gas flow rate is controlled by a needle valve.
9. Equipped with a flame height caliper.
10. Equipped with a gas flow meter and pressure regulator; automatic ignition.
11. The torch angle: 45 °, 0 ° adjustable.
12. The flame calibration device is optional.
Specifications:
|
Operating voltage |
AC220 V ± 10V 50HZ |
|
Ambient temperature |
room temperature ~ 40 ºC |
|
Gas Pressure |
0.1MPa |
|
Gas purity |
Propane> 95%; compressed air |
|
Timing Accuracy |
0.1s |
|
Model |
GD-IEC60332 |
|
Size |
600(W)×450(D)×1250(H)mm |
|
Power |
AC 220V, 50/60Hz, 3A |
|
Weight |
60kg |
|
Manual |
Provide |
Since 2008, Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd. has developed 70 kinds of fire testing instruments and served many industries such as building materials, aviation, rails, IMO, wire & cable, safety protection, and so on.
Our mission is to provide reliable products to our customers to meet their requirements of testing, R&D, and quality control. In addition, Gold insists on high-quality standards in niche markets and targets to minimize the gap between Chinese local products and imported products.
We work with trust, honesty, and a sense of responsibility, so the quality and service are always our advantages over all competitors.
){kind=link}