IEC 60332 Burning Testing Equipment for Single Cable China Manufacture

• Warranty: 12months
• Item Name: Single Vertical Flame Spread Tester
• Reference Standards: Gbt18380/IEC60332
• Model Number: Gd18380A
• Size: 600(W)*450(D)*1250(H)mm
• Power: AC220 V +/- 10V 50Hz
• Model NO.: GD60332
• Weight: 60kg
• Burner Angle: 45 / 0 Degree
• Flame Height: 170mm-190mm
• Inner Flame: 50mm-60mm
• Operating Voltage: AC220 V ± 10V 50Hz
• Gas Purity: Propane> 95%; Compressed Air
• Timing Accuracy: 0.1s
• Ambient Temperature: Room Temperature ~ 40 Degree
• Manual: Provide
• Transport Package: Plywood
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 10

Product Description

IEC 60332 Burning Testing Equipment For Single Cable China Manufacture




Introduction:
IEC 60332 Burning Testing Equipment For Single Cable China Manufacture is themost widely used and low cost of cable fire performance test equipment;single wire or cable burning tester meet the national standard GB /T18380.11-2008 / IEC60332-1-1: 2004 requiremen. It is to test cable , flameretardant insulation layer under fire conditions applicable for testing wireand cable in overheating, overcurrent and other non-normal state.

IEC 60332 Burning Testing Equipment For Single Cable China Manufacture can beused in vertical or fiber optic wire and cable flame spread test, while testunder fire conditions Dettol matter combustion conditions.

International standards:

IEC 60332-1-1,2,3
EN 50086-1-1994
GBT 18380.11,12-2008 

Features:

1, the touch screen intelligent control system; English user interface;

2, the system automatic ignition, automatic timing, automatic datastorage;

3, the test section and the control section is conbined design in onebox for operation;

4, stainless steel test box, the internal cavity size: height 1200mm,width 300mm, depth of 450mm;

6, a pre-mixed burner, an inner diameter of ¢ 12 ± 0.5mm, length is 100mm. 1KW hybrid standard burner,which provides accurate test fire source;

7, the flame burning applied time and hold time can range from 0 to 99 minutes99 seconds range adjustment. Automatic control of the testing process;

8, import needle vavle precisely adjust the flame height, according tostandards, thef blue flame height is 50mm ~ 60mm, total height 170mm ~ 190mm;

9, the gas flow rate is controlled by needle valve;

10, equipped with a steeless flame height caliper.

Specifiction:

Product name	IEC 60332 Burning Testing Equipment For Single Cable China Manufacture
Size	600(W)×450(D)×1250(H)mm
Gas pressure	0.1MPa
Power	AC220 V +/- 10V 50HZ;
Weight	60KG
Model	GD18380A
Gas purity	Propane> 95%; compressed air