| Customization: | Available |
|---|---|
| After-sales Service: | Lifetime Technical Support |
| Warranty: | Warranty Is 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
It is used to test the wear resistance of emulsified asphalt slurry sealant mixture after molding. Used to determine the bitumen content of the slurry seal mix.
1. It is mainly composed of sample tray, wear head, frame and electrical control part. The rack is stable and firm;
2. The flat-bottomed sample tray has a special fixture for positioning, which is easy to install and there is a lifting platform for up and down positioning;
3. The rubber hose on the wear head is easy to clamp;
4. The motor speed is stable, the revolution and rotation are constant, and the test results are accurate;
5. With electronic timing function, the test can be automatically stopped when the time comes.
| Rotation speed of abrasive head | 140r/min |
| Revolution speed | 61r/min |
| Sample pan size | Ø330×50mm |
| Grinding head specification | mass 2.27Kg |
| Rubber hose length | 127mm |
| Time setting | 300±2s |
| Abrasion pipe diameter | 19mm |
| Abrasion pipe wall thickness | 65.4mm |
| Voltage | 220v |
| Rated total power | 0.4kw |
| Dimensions | 700*5000*770(mm) |
| Ambient temperature | 5~35ºC |
Welcome to contact us talk about details if you are interested in Emulsified Asphalt Wet Wheel Abrasion Tester!
){kind=link}