IEC 60332-1 Single Cable Combustion Analyzer Flammability Test

• Customization: Available
• After-sales Service: All Life Technical Supports
• Warranty: 12 Months
• Model NO.: GD-IEC60332
• Product Name: IEC 60332-1 Single Cable Combustion Analyzer
• Standard: IEC 60332-1-1,2,3; En 50086-1
• Application: Ec 60332-1 Combustion Analyzer Flammability Test
• Operating Voltage: AC220 V ± 10V 50Hz
• Gas Pressure: 0.1MPa
• Ambient Temperature: E: Room Temperature ~ 40 ºC
• Gas Purity: Propane> 95%; Compressed Air
• Timing Accuracy: 0.1s
• Weight: 60kg
• Manual: Provide
• Transport Package: Standard Wooden Case
• Trademark: GOLD
• Origin: China
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

IEC 60332-1 Single Cable Combustion Analyzer Flammability Tester

Introduction:

Wire and Cable is the second-largest industry. IEC 60332-1 Combustion Analyzer Flammability Test Panel for Single Cable is the most widely used and low cost of cable fire performance test equipment; IEC 60332-1 Combustion Analyzer Flammability Test Panel for Single Cable meet the national standard GB /T18380.11-2008 / IEC60332-1-1: 2004 requirement. It is to test flame retardant insulation layer under fire conditions applicable for testing wire and cable in overheating, over-current, and other non-normal states. It can be used for vertical or fiber optic wire and cable flame spread tests, and test combustion conditions of Dettol matter under fire conditions.

Standard:

IEC 60332-1-1,2,3
EN 50086-1-1994
GBT 18380.11,12-2008 

Main features:

• Touch screen intelligent control system; English user interface;

• Automatic ignition system, automatic timing, automatic data storage;

• The test section and the control section is combined design in one box for operation;

• Stainless steel test box, the internal cavity size: height 1200mm, width 300mm, depth of 450mm;

• A pre-mixed burner, an inner diameter of ¢ 12 ± 0.5mm, length is 100mm. 1KW hybrid standard burner, which provides accurate test fire source;

• The flame burning applied time and hold time can range from 0 to 99 minutes99 seconds range adjustment. Automatic control of the testing process;

• Imported needle valve precisely adjust the flame height, according to standards, the blue flame height is 50mm ~ 60mm, total height 170mm ~ 190mm;

• The gas flow rate is controlled by needle valve;

• Equipped with a flame height caliper;

• Equipped with a gas flow meter and pressure regulator; automatic ignition;

• The torch angle:  45 °, 0 ° adjustable;

• The flame calibration device is optional.

Specification:

Product name	IEC 60332-1 Single Cable Combustion Analyzer Flammability Test
Operating voltage	AC220 V ± 10V 50HZ
Ambient temperature	room temperature ~ 40 ºC
Gas Pressure	0.1MPa
Gas purity	Propane> 95%; compressed air
Timing Accuracy	0.1s
Size	600(W)×450(D)×1250(H)mm
Power	AC 220V, 50/60Hz, 3A
Weight	60kg
Manual	Provide

Our Services:

*Consulting support. 

*Sample testing support.

*Factory Visiting

*Training support

*Installation support

*24 Hours &7 days of service