| Customization: | Available |
|---|---|
| After-sales Service: | Lifetime Technical Support,Online Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The TPP thermal protection performance instrument is mainly used to test the thermal insulation performance of flame-retardant protective clothing fabrics exposed to radiant heat sources and convective heat sources. It is used to test the thermal protection performance of protective clothing, safety shoes, gloves, helmet outer surfaces, etc. Comply with NFPA 1971, ASTM D4018, GB 8965.1-2009, ISO 17492 and other test standards.
| NFPA 1971,ASTM D4018,GB 8965.1-2009,ISO 17492 |
| Name | thermal protection performance tester |
| standard | NFPA 1971 |
| Size | 1200mm*600mm*600mm |
| Power | 220V 50Hz 10A |
| Weight | 150kg |
| Manual | Supplied |
| Temperature resolution | 0.1C° |
| diameter of the inner pipe | 38mm |
1. Stainless steel frame structure, beautiful, corrosion-resistant, easy to clean;
2. Heat source composition: 1 set of radiant heat source and 2 45° convection heat sources. The radiant heat source consists of 9 T-150 infrared quartz lamps. The convection heat source consists of two mike lamps.
3. Equipped with removable stainless steel protection plate; to ensure the safety and reliability of the test process;
4. The basic components of the thermal protection performance instrument: sample fixture assembly, flame-throwing head radiant heat source, water-cooled shutter sensor, data acquisition system, fuel control regulator, gas rotary flowmeter;
5. 2 Meker burners placed at 45 degrees
6. The diameter of the inner pipe is 38mm, and the diameter of the inner hole is 5/16 inches, which can provide 800-1200 BUT heat output. The burner port is a metal mesh structure, and the air valve at the lower part of the burner can be adjusted to adjust the air and combustible gas. The mixing ratio
7. Nine T150 quartz infrared tube arrays, which can provide a thermal radiation flux of 13 kW/m2 ± 4 kW/m2
8. Under the heat radiation of the quartz infrared tube, by adjusting the gas supplied to the Meker burner, the total heat flux can be set to 83kW/m2±2kW/m2
){kind=link}