IEC 60332-1-1 Single Cable Burning Analyzer Cable Flame Spread Tester

• Customization: Available
• After-sales Service: All Life Technical Supports
• Warranty: 12months
• Model NO.: GD 50086
• Reference Standards: Gbt18380/IEC6032
• Model Number: Gd18380A
• Size: 600(W)*450(D)*1250(H)mm
• Power: AC220 V +/- 10V 50Hz
• Weight: 60kg
• Burner Angle: 45 / 0 Degree
• Falme Height: 170mm-190mm
• Inner Flame: 50mm-60mm
• Operating Voltage: AC210-230V; 10V 50Hz
• Ambient Temperature: Room Temperature ~ 40 Degree
• Gas Pressure: 0.1MPa
• Gas Purity: Propane> 95%; Compressed Air
• Timing Accuracy: 0.1s
• Transport Package: Plywood
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 10

Product Description

IEC 60332-1-1 Single Cable Burning Analyzer Cable Flame Spread Tester


Image:


Introduction:
IEC 60332-1-1 Single Cable Burning Analyzer Cable Flame Spread Tester is themost widely used and low cost of cable fire performance test equipment; TESTECHsingle wire or cable burning tester meet the national standard GB /T18380.11-2008 / IEC60332-1-1: 2004 requiremen.

IEC 60332-1-1 Single Cable Burning Analyzer Cable Flame Spread Tester is to test cable , flameretardant insulation layer under fire conditions applicable for testing wireand cable in overheating, overcurrent and other non-normal state. It can beused in vertical or fiber optic wire and cable flame spread test, while testunder fire conditions Dettol matter combustion conditions.

International standards:

IEC 60332-1-1,2,3
EN 50086-1-1994
GBT 18380.11,12-2008 

Features:

1, the touch screen intelligent control system; English user interface;

2, the system automatic ignition, automatic timing, automatic datastorage;

3, the test section and the control section is conbined design in onebox for operation;

4, stainless steel test box, the internal cavity size: height 1200mm,width 300mm, depth of 450mm;

6, a pre-mixed burner, an inner diameter of ¢ 12 ± 0.5mm, length is 100mm. 1KW hybrid standard burner,which provides accurate test fire source;

7, the flame burning applied time and hold time can range from 0 to 99 minutes99 seconds range adjustment. Automatic control of the testing process;

8, import needle vavle precisely adjust the flame height, according tostandards, thef blue flame height is 50mm ~ 60mm, total height 170mm ~ 190mm;

Specifiction:

Product name	IEC 60332-1-1 Single Cable Burning Analyzer Cable Flame Spread Tester
Size	600(W)×450(D)×1250(H)mm
Gas pressure	0.1MPa
Power	AC220 V +/- 10V 50HZ;
Weight	60KG
Gas purity	Propane> 95%; compressed air