IEC 61034 matériel de test d′inflammabilité analyseur de densité de fumée pour câble

• After-sales Service: All Life Technical Supports
• Warranty: 12months
• Item Name: IEC 61034 Flammability Testing Equipment
• Reference Standards: IEC60134/Gbt17651
• Model Number: Gd60134
• Power: 220 V AC, 60 Hz, 15 a
• Model NO.: GD 61034
• Weight: 500kg
• Control Way: Computer
• Utilities: Propane Gas Valve System, Ignition System
• Size: 1, 000(W) × 2, 000(D) × 4, 000(H)
• Light Source Power: DC12V, 100W
• Light Source Focus Intensity: 1:20
• Photo Cell Cell Type: Selenium Cell
• Exhaust Blower Material: Stainless Steel (Inner Fan)
• Exhaust Blower Fan Flow: 7 M3/Min ~ 15 M3/Min
• Foundation Fixed: Fixture Unit
• Transport Package: Plywood
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 10PCS/Month

Product Description

IEC 61034 Flammability Testing Equipment Smoke Density Analyzer For Cable

Image:


Introduction:

IEC 61034 Flammability Testing Equipment Smoke Density Analyzer For Cable is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burn under definite fire resource in the specified condition (3m3 chamber required by IEC 61034).

IEC 61034 Flammability Testing Equipment Smoke Density Analyzer For Cable is important to measure the smoke generated from the value of light source penetration through the smoke generated when the cable exposed to the specified standard fire source (ethanol 90±1%, methanol 4±1% and distilled water 6±1%) 1L±0.01L is burned. 

International standards:
1. GBT17651
2. IEC 60134
 

Features:

- Chamber internal area is 3000mm±30mm and it's structured as Cubic Enclosure with an appropriate fixed iron frame angle. 
- It's configured with a door with test glass windows and in both faces of the opposite side, there's a sealed transparent window (minimum 100mmX100mm) with a horizontal light measurement system that allows light penetration. 
- Designed to prevent direct sunlight exposure and severe weather change in Enclosure. 
- Photocell and Light sources are located in the middle part of both windows of the wall surface in the opposite side to avoid physical contact. 
- A lamp to provide regular light is installed. 
- Two types of auto Filter system (Carrusel) are installed to automatically calibrate the transmissivity of light. 
- The reduction of light by smoke is measured using Photocell. 
- In order to verify accordingly the intensity of radiation to measure light change by self-emission, the equipment has been designed to fit various kinds of filters in the Light Source.   
- Support system to allow separate fitting of Light Source and Photocell in the outer wall. 
- The Light Source is a halogen lamp with a clean crystal lamp and tungsten filament. 
- Average power: 100W, Average voltage: DC12v, Average velocity of light: 2000 lm~3000 lm, and Average color temperature: 2800K~3200K. 
- The Receptor Photocell is selenium or silicone type and has a spectrum reaction conform to Photopic Observer (similar to a human eye) of the International Commission on Illumination (CIE). 
- A heating system is installed within the cube to swiftly match the standard temperature (25ºC±5ºC) in the initial test. 
- We seek tester's safety and convenience through an Auto ignition system.

Specification:

Product name	IEC 61034 Flammability Testing Equipment Smoke Density Analyzer For Cable
control way	computer
Power	220VAC 3A 50Hz
Weight	500KG
Model	GD60134
Exhaust Blower Power	AC220V, 60Hz, φ1, 210W
Transparent sealed window	100*100mm
size	3,000(W) × 3,000(D) × 3,000(H)
Exhaust Blower Size	246(W) x 220(D) x 205(H) mm