Low Temperature Oil Pour Point Cloud Solidification Point Test Cooling Baths

• After-sales Service: Lifetime Technical Support
• Warranty: 1year
• Max Diameter of Workpiece: 500mm
• Mass Scope of Workpiece: <900kg
• Type: Petroleum Products Solidifying Point & Cold Filter
• Maxcapacity: <1000KN
• Model NO.: GD-510D
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Power Supply: AC 220 V±10%, 50 Hz
• Cold Trough I: Room Temperature~-51 ºC
• ) Cold Trough II: Room Temperature~-70 ºC
• Refrigeration System: a Refrigeration Compressor of New Type
• Ambient Temperature: ≤30 ºC
• Relative Humidity: ≤85%
• Power Consumption: Not More Than 1500 W
• Transport Package: Wooden Case
• Specification: 620mm*460mm*355mm
• Trademark: GOLD
• Origin: China
• HS Code: 9031809090
• Production Capacity: 200units/Month

Product Description

ASTM D852 Low Temperature Oil Pour Point Cloud Solidification Point Test Cooling Baths 

Significance and Use:
The pour point of a petroleum specimen is an index of the lowest temperature of its utility for certain applications.
This test method covers and is intended for use on any petroleum product.A procedure suitable for black specimens, cylinder stock, and nondistillate fuel oil

Working condition:
1. The instrument should be placed on a flat and firm workbench without air draft.
2. The combustible materials are involved during test, so there should not have any fire (or device can bring out any spark) near the instrument.
3. The instrument should be placed in a dry and ventilated area after tests.
4. Power supply is single phase three wires system. It should have fine grounding end.

Features:
1. The working table is stainless steel material. It has two chambers(chamber I and chamber II) .Each chamber equipped two cooling baths.The temperature of these two baths are the same. All cooling baths can determine pour point and cloud point.
2. It is no need to use coolant in the chamber. The cooling speed is fast and cooling efficiency is high. The temperature controller I controls the temperature of chamber I and temperature controller II controls the temperature of chamber II. The minimum temperature of chamber II can reach -70ºC and temperature control precision is ±1ºC.
3. The instrument adopts bench structure, concise design and easy to use. 

Main technical specifications:

1. Power supply	AC 220 V±10%, 50 Hz;
2. Temperature control of chamber	(1) Chamber I: Ambient to -51 ºC, ±1 ºC, temperatures of two cooling baths the same. (2) Chamber II: Ambient to -70 ºC, ±1 ºC, temperatures of two cooling baths the same.
3. Refrigeration system	New type refrigeration compressor
4. Ambient temperature	≤30 ºC
5. Relative humidity	≤85%
6. Maximum power consumption	1500 W
7. Dimension	800mm×580mm×400mm

 

Product Structure:
(1) Temperature controller I for cold trough I      (2) Cold trough I  (3) Main power supply switch   (4) Cold trough II  
(5) Temperature controller for cold trough II
1. The upper surface of the instrument is made of stainless steel. The two baths at left side form the cold trough I, and the two baths at right side form the cold trough II. Both cold trough I and cold trough II can be used for pour point and cloud point test.
2. The right side of the instrument is controlling parts. The temperature controller I and temperature controller II are used to control temperature in the cold trough I and cold trough II respectively. 
3. There is a refrigeration compressor system installed in the inside of the instrument. The system is a refrigeration chamber of the instrument. It is forbidden for nonprofessional to disassemble the working chamber.

Workshop:
At present, there are more than 150 employees, of whom more than 70% are technical personnel with college degree or above.With strong technical force and strong development, new products have been launched continuously.
*Over 10 years trading experience of Lab instruments
*50 years experience in R&D and manufacturing Cast GOLD Brand
*Passed ISO9001 international quality system certification
*Mainly develop and produces analyzing instruments for petroleum Products and Asphalt 
analyzing equipments for Highway Engineering.
*our companys productions have become highly intelligentized and widely cover.With strong 
technical force and strong development, new products have been launched continuously.

Exhibition:
We have developed sales channels in many countries such as UAE, Saudi Arabia, Iran, Malaysia, Thailand, Pakistan,India, Germany, Belgium, USA, Mexico, Kenya, Nigeria, South Africa and other countries worldwide. And we have gained strong advantage and high reputation in international market. After several years' development, our products have become high intelligent and wide coverage. And our company has become one of the leading manufacturer of petroleum testing instrument and electrical testing instrument.

Packing:
Goods are packed in veneer case, which is firm and safe for oversea shipment.

Contact Us:
If you want to know more information about Low Temperature Oil Pour Point Cloud Solidification Point Test Cooling Baths ,Don't hesitation, welcome your inquiry!Price can be negotiated ! Please feel FREE to contact us if you have any needs. And welcome to visit our OFFICIAL WEBSITE at:
http://chinainstrument.en.made-in-china.com