IEC 60331 Wires Fire Resistance Mechanical Shock Testing Apparatus

• After-sales Service: Yes
• Warranty: 1 Year
• Product Name: Wire Fire Resistance Test Apparatus
• Standard: IEC 60331
• Voltage: AC 380V 3-Phase, 50 / 60Hz, 30A.
• Input Voltage: 0 ~ 1000V (Can Be Adjusted)
• Model NO.: GD-IEC60331
• Breakdown Current: 2A
• Maximum Power: 5000va
• Timer: 0 ~ 999min
• Size: 1,600 (W) * 850 (D) * 1,650 (H) mm
• Console Size: 600 (W) * 750 (D) * 1,200 (H) mm
• Weight: 100kg
• Transport Package: Wooden Case
• Specification: 2150mm x 1200mm x 2150mm
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

IEC 60331 Wire Fire Resistance Test Machine

 

Introduction:   

Wires and cables that are difficult to catch fire and have the ability to prevent or delay flame spread generally refer to wires and cables that can pass the GB / T18380.3 (equivalent to IEC60332-3) test.IEC 60331 Wire and Cable Fire Resistance Test and Hammer Test Machine fully comply with the latest standard requirements of BS6387-2013 Design and manufacture; equipment can save the cost of multiple electrical control boxes for customers to the greatest extent. It can test three tests on the basis of an electrical control box.

The system uses a touch screen microcomputer control system; various experiments can be freely selected on the screen.
The hammer test bench can also realize automatic ignition or manual auxiliary ignition. The flame temperature can reach more than 950 degrees.

 

Standards:   

• IEC 60331 part 12    

• IEC 60331 part 31    

• IEC 60331-1     

• BS6378 (Option)

 

Main Features:   

Fire Resistance Test:

1.  The burner is a belt-type propane gas torch with a Venturi mixer, the nozzle is 500mm long and 15mm wide, and is equipped with a Venturi mixer.

2.  Three rows of combustion holes are staggered, the width of the front end of the burner: 15mm; the diameter of the hole: 1.32mm, the distance between the centres of the holes: 3.2mm.

3.  A row of guide holes are provided on both sides of the nozzle plate to keep the flame burning.

4.  Imported with dual flow meters and pressure regulation.

5.  Airflow rate (80 ± 5) L / min; propane flow rate (5 ± 0.25) L / min.

6.  With a temperature measuring device diameter 2mm; (K-type thermocouple).

7.  A clip is installed at one end of the sample holder to fix the sample, and the other end facilitates the heat transfer along the longitudinal direction of the sample.

8.  The cable sample is supported by two metal rings with a middle length of about 300mm.

9.  The inner diameter of the sample supporting metal ring is 150mm, and the diameter of the ring section is 10 ± 2mm.

10.  The position of the burner torch is not less than 200mm from the bottom of the combustion box and not less than 300mm from the wall of the box.

11.  The horizontal axis of the burner torch is 70 ± 10mm from the lower end of the cable sample, and the longitudinal axis of the burner is about 45mm from the vertical axis of the cable.

12.  Two 1.5mm diameter thermocouples (A, B) are installed horizontally on the left and right sides 45mm away from the burner centerline, check the flame temperature is within 750 + 50 ºC; according to BS6387 standard, the temperature can also reach 950 ºC.

13.  With intelligent detection function, when the sample has a short circuit during the test, it will automatically alarm and turn off the fire source.

14.  PLC plus touch screen intelligent control, and automatically record and store test data.

15.  The fuse current in the sample circuit is 2A.

16.  The sample application power AV 100V ~ 1000V is adjustable.

17.  The fire supply time can be set freely, the standard recommended time is 90min.

18.  The 27m³ combustion chamber is optional.

Combustion System:

1.  Independent standard electrical control platform.

2.  With intelligent detection function, when a short circuit in the sample during the test, automatic alarm and turn off the fire source.

3.  Fuse current in the experimental circuit is 2A.

4. The sample is applied to power of AV 100V ~ 1000V adjustable;  5, The time can be set free for the fire, the time recommended by standards is 90min.
 

Device parameters:

1.  Voltage: AC 380V 3-phase, 50 / 60Hz, 30A.

2.  The input voltage 0 ~ 1000V; can be adjusted.

3.  The breakdown current is 2A.

4.  Maximum power: 5000VA.

5.  Timer: 0 ~ 999min .

6.  The flame temperature of 0 ~ 1100 ºC adjustable.

7.  The test load current is 0.25A, can be adjusted.

 

Specification:   

Size	1,600 (W) × 850 (D) × 1,650 (H) mm
Console size	600 (W) × 750 (D) × 1,200 (H) mm
Power	AC 380V 3-phase, 50 / 60Hz, 30A
Weight	100kg

Company information:

Chongqing Gold Mechanical&Electrical Equipment Co.,Ltd , is established in 2008 which is dedicated to designing, manufacture, and service of Fire Testing Equipment. We have a strong team including top sales, skilled engineers and we have our own manufacture with high quality. Since then, We have business with many countries, including China, USA, India, Singapore, Pakistan, Indonesia, and European. Our primary services include Building materials, Aviation, Rails, IMO, Wire and Cable, Safety Protection, Automotive Interior and so on.