Introduction of the product
GDMS-6 Time Calibrator can quickly and conveniently complete the calibration of time relays, high-voltage switch testers, relay protection testers and various high-precision timekeeping instruments. High-voltage switch testers are generally divided into two types: with operating power and without operating power, and without operating power is divided into the following two types: with relays and without relays. Those with relays are called "active" and those without relays are called "passive". With operating power high-voltage switch tester, the operating power to 110V or 220V, according to the requirements of the instrument under test set, in the time calibrator, press "clear", after the operation of the high-voltage switch tester, and then the results are displayed. No operating power high-voltage switch tester "active", "passive" as above, only in the "passive" when you need to press the closing button of the time calibrator before the results are displayed.
What is a Time Relay Used For?
The main time relay function is to control an event based on time. The device is, therefore, used in a variety of applications
that require timed sequences or intervals. These range from simple timers to complex sequence controls. Some of the most common time delay relay uses are listed below:
* Time relays are installed in buildings to turn on and off lights at specific times.
* In homes, a timed relay may be used to control a variety of appliances and systems such as the HVAC system.
* Time delay relays find extensive application in a range of industrial systems such as motor starting control, conveyer belt control, and turning on/off valves.
* In security systems these relays operate burglar alarms and other security installations.
* Telecommunication companies use timing relays to control various systems and processes.
* In the automotive industry, the time relay is employed in a number of functions such as the control of turn signals.
Principal technical criteria
Calibration time |
1ms-500ms |
Bounce time |
1ms-99ms |
Breakout for six-way, or three-way output, (optional) |
Can output six-way or three-way different time parameters (non-simultaneous) |
Calibration data storage |
40 groups |
Resolution |
0.01ms (0.2% error) |
Built-in power supply |
DC 20V-230V (1% error) |
Power supply |
AC 198V-230V,50HZ |
Power |
20-2000W (instantaneous power) |
Working conditions |
Temperature:10-30ºC Humidity:≤ 85% RH |
Storage and transportation conditions |
Temperature: -10-50ºC Humidity:≤ 85% RH |
Dimension |
400mm * 320mm * 230mm |
Weight |
7kg |