Bunched Cables Burning Behaviour Tester IEC 60332

• After-sales Service: All-Life Technical Support
• Warranty: 12 Months
• Product Name: Bunched Cables Burning Behaviour Tester IEC 60332
• Standard: IEC 60332-3, En 50399, UL1685
• Material: Stainless Steel
• Size: 1,000(W) * 2,000(D)*4,000(H)
• Model NO.: GD-IEC60332-3
• Power: 220 V AC, 60 Hz, 10 a
• Weight: About 500kg
• Utilities: Propane Gas Valve System, Ignition System
• Transport Package: Plywood Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

Bunched Cables Burning Behaviour tester IEC 60332

 

Product Description

Introduction: 

Bunched Cable Vertical Flame Spread Tester in accordance with the relevant provisions of UL1685, GB18380.3 standard, and cable burning test requirements designed equipment. And in accordance with IEC 60332-3-10, KS C IEC 60332-3-21 ~ 25 (A ~ Class D) standard.

It is used to bundle cable or fiber optic cable to detect vertically mounted under specified conditions for vertical flame spread inhibiting the ability of the instrument, the power cables, control cables, and fiber optic cable bundle burning test Preparation means. 

When given a certain amount of housing supply of gas and the use of a standard ignition source of ignition, this instrument can be used to test for vertical flame diffusion to electric cables and wires of state. In addition, if the tester burner adjustment of 20 degrees can be achieved by IEEE 383 (IEEE 1202) testing standards. Equipment can be equipped with a heat release instrument to configure the port, with the gas analyzer can measure the thermal power values such as HRR (heat release rate), SPR (smoke generation rate), and so on.

Standard:

• UL1685

• IEC 60332-3-10

• EN 50399

• GB/T 18380.31

•IEC 60332-3: Test on Electric cables under fire conditions part 3: Test on bunched wires or cables

• KS C IEC 60332-3-21 : Category A F/R

• KS C IEC 60332-3-22 : Category A

• KS C IEC 60332-3-23 : Category B

• KS C IEC 60332-3-24 : Category C

• KS C IEC 60332-3-25 : Category D

Feature: 

1, Stainless steel test box the size of 1,000 ± 100 (W) x 2,000 ± 100 (D) x 4,000 ± 100 (H)mm. The interior surface of the case than the high ground, and the rear side is covered with insulation material.

2, With a standard stainless steel ladder, based on ladders GB / T18380.31 requirements;

3, Alternate sample frame 2;

4, ladders made of stainless steel; corrosion-resistant; easy to clean;

5, In the lower part of the cabinet, from a position in front of the housing 150 ± 10mm has an 800 ± 20 (W) × 400 ±10 (D) air intake.

6, the inside of the box is mounted thermocouple type K thermocouples, 2mm in diameter

7, The airflow inside the combustion furnace can be stably controlled at (5000 ± 500) L / min.

Combustion System:

1, Burner: with type propane gas burner, size 257mm × 4 5mm, opening a total of 242, three lines are arranged, respectively81,80,81 holes, hole diameter of 1.35mm, the distance between holes is 3.2 mm;

2, High-precision ball, control the gas off;

3, Two-meter: airflow and gas flow meter and control valve;

4, The front end of the combustion flame installation tester off the tube to protect the propane gas tempering, so as to ensure maximum safety on the specimen

5, Combustion angle: horizontal; automatic ignition device; (20 degrees adjustable is optional)

6, The burner air and gas flow rate must be supplemented with temperature and pressure, while many traditional systems ignore the impact of gas and air can be done automatically by a computer program in the compensation process

Specification: 

Size	1,000(w) ×  2,000(D) ×  4,000(H)
Power	220 V AC, 60 Hz, 10 A
Weight	About 500kg
Utilities	Propane Gas Valve System, Ignition System