GD-17144 MCRT Micro Carbon Residue Tester Equivalent to the
Conradson Carbon Residue Test
The MCRT Micro Carbon Residue Tester is an automatic airtight furnace that is pre-programmed to run tests to determine Micro (Conradson) Carbon residue of petroleum products. It determines the amount of carbon residue formed after evaporation and pyrolysis of petroleum materials under certain conditions and is intended to provide some indication of the relative coke forming tendency of such materials.
The measurement range of this instrument is 0.10%(m/m)~30.0%(m/m).The test result is equivalent to the result of determination by Conradson method(GB/T268) if the carbon residue value is higher than 0.10%(m/m).
The instrument is suitable to determine the the amount of carbon residue of petroleum products. This instrument adopts all-in-one structure. It consists of two parts: electrical control chamber and high temperature heating furnace. The design is simple and reasonable
1. The Micro Conradson Carbon Residue Tester adopts single chip machine system. The instrument controls the whole procedures automatically according to program preset.
2. The screen adopts all English interface. Operator can do determination by prompts on the screen even no need to read the operation manual. Easy to operate.
3. The Micro Carbon Residue Tester controls the flow rate of nitrogen, temperature heating rate and preset temperature automatically. Easy to adjust the flow rate. The heating rate is accurate and temperature control is stable.
4. It collects test data and calculates results automatically. It can print and save the data according to customer's requirements.
5. The carbon residue apparatus can also be used to determine the petroleum products composed of distillate oils which carbon residue is lower than 0.10%(m/m). But the specimen shall be sampling to 10%(V/V)distillation residue according to GB/T6536(ASTM D86) firstly.
6. It equips a electric balance to achieve the automation of sample weighing and data input.
7. The Key Features of this instrument are: It can detect the micro residual carbon; It can realize the automation of sample weighing data input; The testing process is fully automated.
| 1 |
Power supply |
AC(220±10%)V, 50Hz |
| 2 |
Maximum power consumption |
1600W |
| 3 |
Temperature of coke chamber |
500ºC |
| 4 |
Temperature control accuracy |
±2ºC |
| 5 |
Heating power |
1500W |
| 6 |
Ambient temperature |
5ºC~35ºC |
| 7 |
Relative humidity |
≤85% |
| 8 |
Dimension |
520mm×360mm×525mm |
1.Coke chamber(Heating furnace):The sample is placed in the chamber to coke.
2.Cover of coke chamber(Cover of heating furnace):Specially designed for coke chamber.
3.Air outlet:The exhaust gas will be removed outside by a exhaust pipe from the coke chamber through the air outlet.
4. Screen:Colored touch-type LCD. It is used to input and show parameters.
5. Cooling rack 6. Printer:Needle printer
7.60ml/min control valve 8. 150ml/min control valve
9. Power wire:250V/16A
10 .Communication port:It is the serial port communicating with computer.
11.Power switch:The power switch of instrument.
12. Flowmeter:It shows flow rate of air source.
13. Pressure adjusting knob:
14. Pressure gage:It shows the pressure of air source.
15.Condensate collecting tank: It is used to collect the condensate in the coke chamber.
| No. |
Name |
Unit |
Qty |
Remarks |
| 1 |
Main unit |
Set |
1 |
|
| 2 |
Sample tube holder |
Piece |
1 |
|
| 3 |
Big sample tube(12×70mm) |
Piece |
24 |
|
| 4 |
Small sample tube(12×35mm) |
Piece |
24 |
|
| 5 |
Sample tube hook |
Piece |
1 |
|
| 6 |
Air inlet pipe(ф6 PU pipe, 2m) |
Set |
1 |
Used to connect the steel cylinder with main machine |
| 7 |
Exhaust pipe(ф10PU pipe, 2m) |
Piece |
1 |
Used to remove exhaust gas |
| 8 |
Electric balance(110g, accuracy grade I, readability 0.1mg) |
Set |
1 |
|
If you want to know more information about Mcrt Micro Carbon Residue Tester Equivalent to The Conradson Carbon Residue Test,Don't hesitation, welcome your inquiry!Price can be negotiated !
Audited Supplier 
){kind=link}
){kind=link}